T.P.
RENTAL SERVICES INC

417 W 50th St.,
New York, NY 10019-6527

Got Insurance?

Member of American Rental Association

     
Item
Description
Check to reserve
Automatic Laser Levels ELECTRONIC SELF LEVELING LASER COMES WITH A 40 HR - RECHARGEABLE BATTERY, UNIVERSAL MOUNTS, MAGNET TARGETS, GLASSES, TRIPOD AND REMOTE. USE WITHIN 1000 FT. ACCURACY ± 3/16" AT 100 FT.
Floor Burnisher 2000 RPM HIGH SPEED POLISHING MACHINE APPLYING A HIGH GLOSS FINISH ON WOOD OR VAT TILE.
Strip Serts USED ON THE EDCO 2EC SURFACE GRINDER FOR REMOVING RUBBER, ICE, FIBERGLASS, RESINS, TAR OR PAINT FROM CONCRETE SURFACES WITHOUT GRINDING INTO CONCRETE.
Dyma serts USED ON THE EDCO 2EC SURFACE GRINDER TO REMOVE CONCRETE OR ASPHALT, ERASE TRAFFIC LINES, STRIP FLOOR COATINGS, ELIMINATE UNEVEN JOINTS. 4-SEGMENT DIAMOND INSERTS UP TO 30,000 SQ. FT OF LIFE. LESS TIME CLEANING UP… MORE PROFIT
Sheetrock Panel Lifters to 15' AN ADJUSTABLE CRADLE ACCOMMODATES BOARDS UP TO 4' X 16' WITH BUILT-IN OUTRIGGERS.
Air - Compressor 17 Gal 17 GALLON TANK. SINGLE PHASE 2 HP, 115 VOLT ONLY DELIVERING 9.9 C FM'S DISPERSED WITH A FACTORY SETTING OF 125 PSI (5.0) 30 AMP BREAKER REQUIRED ACCESSORIES:COMPRESSOR FITTINGS, HOSE
Aurand M5 Tool-Electric

½ HP AC MODEL USES CUTTER BUNDLES #23M OR #90M FOR CLEANING ACCUMULATIONS FROM CONCRETE, BRICK, AND/OR TERAZZO. ACCESSORIES: 23 M OR 90 M CUTTER BUNDLES, DUSTMASKS, GLOVES, GOGGLES.
Extension Cord

25'—16/3, 12/3
50'—16/3,12/3
100'—12/3,10/3
* ALSO ASK ABOOUT OUR GROUND FAULT INTERRUPTERS NOTE: EXTENSION CORD CAN ONLY BE RENTED OUT WITH ANOTHER PIECE OF EQUIPMENT
Chain Fold - 2 Ton

WILL LIFT UP TO 2 TONS, 20 FEET HIGH USING A BLOCK AND TACKLE
Cement Mixer 3/4 Bag

USED TO MIX CEMENT OR MORTAR. ON THIS 1 BAG SIZE 8 MIXES EQUAL 1 YARD CONCRETE. ACCESSORIES:GLOVES
Car Polisher

ACCEPTS BLENDED WOOL PADS AND BONNETS FOR HIGH GLOSS FINISHING, 100% WOOLEN YARN FOR COMPOUNDING, BLENDING & POLISHING, WOOLEN BLEND PADS RUN COOLER THAN 100% WOOL AND ADD SAFETY ON CLEAR COAT FINISHES. ACCESSORIES: LAMBS WOOL BONNET PADS.
Dehumidifier

TURN HUMIDISTAT CONTROL TO OFF, THEN PLUG IN THE DEHUMIDIFIER. TURN THE HUMIDISTAT CONTROL CLOCKWISE TOWARD DRIEST FOR NORMAL OPERATION. AUTOMATICALLY STARTS WITH INCREASE IN HUMIDITY, STOPS WITH DECREASE IN HUMIDITY. ACCESSORIES: LIGHT ON DEHUMIDIFIER GLOWS WHEN PAN IS FULL OF WATER.
Furniture Dollies

ACCESORIES:GLOVES
Heaters- Electric- 5120 BTU CONVECTION HEAT USING A LIQUID RESERVOIR AUXILIARY HEATER LOCATED ABOVE THE PRIMARY FINNED ELECTRIC HEATING ELEMENT.
Drill-½ TRIGGER SPEED CONTROL REVERSING HEAVY-DUTY DRILL UP TO ½" IN STEEL. ACCESSORIES: DRILL BITS.
Drill-Angle FOR PERCUSSION CARBIDE-BIT DRILLING IN CONCRETE AND MASONRY AND DRILLING WITHOUT HAMMERING IN WOOD OR METAL. ACCESSORIES: MASONRY DRILL BIT AND ARTU (CADMIUM COBALT)FOR HARDER MATERIAL
Drill - Hammer FOR PERCUSSION CARBIDE-BIT DRILLING IN CONCRETE AND MASONRY AND DRILLING WITHOUT HAMMERING IN WOOD OR METAL. ACCESSORIES: MASONRY DRILL BIT AND ARTU (CADMIUM COBALT) FOR HARDER MATERIAL
80C - Coil Nailer NAILER USED FOR INSTALLING WOOD SUB- FLOORS, UNDERLAYMENT PLYWOOD. USE AIR PRESSURE BETWEEN 70 - 100 PSI. ACCESSORIES: 1½" UP TO 3¼" NAILS (PLAIN SHANK, COATED - AND/OR GALVANIZED OR HARDENED) - STAINLESS STEEL COATED)- (RING SHANK COATED AND/OR GALVANIZED) - (ALUMINUM RINGSHANK COATED)
Air - Compressor - 3.8 Gal 3.8 GALLON TANK.. SINGLE PHASE ¾ HP, 115 VOLT ONLY DELIVERING 3.9 CFM DISPERSED WITH A FACTORY SETTING OF 125 PSI (1.25) 20 AMP BREAKER REQUIRED ACCESSORIES: GOGGLES,AIR COMPRESSOR FITTINGS, HOSE.
Finish Nailer (air) NAILER USED FOR INSTALLING OR FINISHED WOOD MOLDINGS. DRIVES HEAVY DUTY. TRUE BRAD FINISH RANGING FROM 1¼ TO 2½ . ACCESSORIES: NAILS, GOGGLES, GLOVES, EAR PLUGS.
Floor Sander USED TO SAND LARGE WOODEN FLOOR AREAS USING 16X, 36X, 60X, 80X, 100X PAPER. ACCESSORIES: SAND PAPER, FINISH SCREENS, TACKKLEEN, LAMBS WOOL & WATER WIZ APPLICATORS, RED BURNISH PAD, LIQUID PASTE WAX, POLYURETHANE (SATIN, SEMIGLOSS, GLOSS) GLOVES, DUST MASKS.
Floor Edger USED TO SAND ALONG WOODEN FLOOR PERIMETER USING 16X, 36X, 60X, 80X, 100X PAPER. ACCESSORIES: SAME AS FLOOR SANDER ITEMS
Floor Tile Stripper STRIPS OLD FLOOR COVERINGS- REMOVES CARPET, RESILIENT, VINYL OR CERAMIC TILE OFF WOOD OR CONCRETE SUB-FLOORS. ACCESSORIES: TILE BLADES - FOR REMOVAL OF CARPET, PLASTER AND OTHER ACCUMULATIONS #34 BLADE- FOR GLUED DOWN CARPETS #16 BLADE- ALL PURPOSE BLADE #40 BLADE
Floor Nailer Manual (with mallot)

USE 1½ OR 2" POWERCLEATS FOR INSTALLING½",25/32", OR 33/32" T&G FLOORING. RENT WITH WHITE MALLOTTO ELIMINATE SCUFF MARKS. ACCESSORIES: (T&G NAILS, HAMMERS, GLOVES. GOGGLES)
Floor Scrubber/Polisher TO REMOVE OLD POLYURETHANE’S AND ADHESIVES USE (3M) BLACK HI-PRODUCTIVITY STRIP PADS WITH "ORBITAL REMOVE-ALL" OR (3M) #303 DRY-STRIP. TO CLEAN  DIRT AND SCUFF MARKS USE (3M) 51 LINE BLUE PADS WITH (3M) BLUE #202 FOAM SCRUB.  FOR BUFFING SUPER POLISHING USE (3M) 51 LINE RED BUFFING PADS WITH (3M) RED #A101 SPRAY CLEANERUSE (3M) SUPER POLISHING WHITE PADS WITH "ORBITAL" TACKKLEEN OR LIQUID PASTE WAX. ACCESSORIES: ALL THE AFOREMENTIONED.
Floor Sander/Edger

USED TO SAND WOOD FLOORS USING SANDPAPER OF GRITS 16X, 36X, 60X, 80X, 100X. ACCESSORIES: SANDPAPER, DISCS, TACK KLEEN, SCREENS, APPLICATORS, POLYURETHANE. GOGGLES, DUST MASKS, GLOVES.
Linoleum (tile/parquet) Roller

ROLLER ENSURES CLOSE FIT OF TILES WITH MASTIC TO PRODUCE A PROFESSIONAL FINISH
Marble Tile Saw w/10" Blade

GRANITE, USE ALPHA PLUS BLADE AND INCREASE RENTAL PRICE BY $30 PER DAY. ACCESSORIES: DIAMOND BLADES FOR CUTTING, PADS FOR POLISHING, PROFILING BLADES TO MAKE CONTOURS IN MARBLE AND GRANITE, GOGGLES.
Floor Nailer (air)

USED TO INSTALL T & G FLOORING ONTO SUBFLOORS USING A U-SHAPEDCLEAT OR A FINISHED NAIL.ACCESSORIES: STICK FEED FLOORING STAPLES DRIVES 15½ GAGE STAPLES IN LENGTHS FROM 1½" TO 2".
Squar-Buff (finishing sander)

USED TO FINISH SAND GOOD FLOORS AND SAND DOWN TO 150X. ALSO, REMOVES SAND LINE AND USED AS A POLISHER, EDGER AND SANDER. ALSO SANDS UNDER RADIATORS>= 3"HIGH. ACCESSORIES: PAPER, SCREENS, TACK KLEEN, APPLICATORS, POLYURETHANE (WATER OR OIL)
Laser - Level

(FOR INTERIOR use) AUTOMATIC LASER WITH RECOMMENDED USE WITHIN 1000 FT-ACCURACY ± 3/16" AT 100FT THIS ELECTRONIC SELF-LEVELING LASER COMES WITH A 40HR RECHARGEABLE BATTERY. ACCESSORIES: UNIVERSAL MOUNTS, MAGNET TARGETS, LASER ENHANCING GLASSES.

Surface Scarafire (Grinder)

GRINDS CONCRETE SLABS, TERRAZZO, BRICK & STONE FLOORS, REMOVES EXCESS CONCRETE EPOXY, TILE MASTIC, TAR, WAX AND SCARAFIRES OR ROUGHENS SMOOTH SLAB AND PREPARES SURFACE FOR IMMEDIATE REINSTALLATION. USES STONES, SCARAFIRE WHEELS, WIRE BRUSH+DYMASERTS. ACCESSORIES: STONES, WHEELS, BRUSHES,DYMASERTS

Turbo Dryer USED TO DRY RUGS, RESILIENT TILE, CERAMIC OR WOOD FLOORS.
Vacuum Cleaner (dry) sm (sq. buff) REQUIRES WHEN USED DRY A (SBV328995C VACUUM BAG), WHEN USED WET A CONVERSION PAN. REQUIRES A SQUARE BUFF VACUUM BAG. ACCESSORIES: VACUUM BAGS, GFI, HOSE ASSY., COMBO/CARPET FLOOR TOOL, utility nozzle, crefice TOOL.
Vacuum Cleaner (wet/dry) USE THE 49-90-0301 VACUUM BAGS. USE DRY WITH FLOOR TOOL, WIRE FRAME, CLOTH FILTER & GASKET. USE WET WITH CONVERSION PAN, SQUEEGE SHOE. ACCESSORIES: VACUUM BAGS, GFI
Belt Sander (4x24)

FAST MATERIAL REMOVAL OF WOOD & METAL SURFACES. GRITS AVAILABLE 40X,60X,80X,100X, 120X, 150X, 220X. FOR METAL SURFACES USE RESIN BOND CLOTH OPEN COAT. ACCESSORIES: PRODUCTION, EMERY, CROCUS AND WET/OR DRY 4X24" PAPER.
Wallpaper Remover - Steam

CREATES STEAM WHICH WHEN APPLIED TO WALLPAPER COVERINGS WILL SOFTEN ADHESIVE FOR EASY REMOVAL. ACCESSORIES: GROUND FAULT INTERRUPTER (GFI).
Cast Iron Cutter CUTS CAST IRON TO 6" note: cost to release a jammed tool is $25.00
Paint Sprayer/Airless USED TO SPRAY LATEX, OIL OR VARNISH LACQUER OR SHELLAC WITH PROPER ATTACHMENTS. ACCESSORIES: PISTON LUBE, LIQUID SHIELD.* $50 CLEANING DEPOSIT MUST BE GIVEN AS ADDITIONAL SECURITY. THIS WILL BE RETURNED IF UNIT IS CLEANED WITH LIQUID SHIELD AS PER INSTRUCTIONS.
Heaters - 150000 BTU Kerosene FOR USE IN WELL VENTILATED AREAS ONLY; USER MUST SUPPLY AT LEAST 3 SQ. FT. OF FRESH AIR SUPPLY FOR EACH 100,000 BTUs OF HEATER CAPACITY; IN ACCORDANCE WITH LOCAL CODES AND ORDINANCES. ACCESSORIES: K1-WHITE KEROSENE, KEROSENE CANS.
Fan Pedestal 24"x6" Adjustable GUARDS COMPLY WITH OSHA REGULATIONS, FANS EQUIPPED WITH 3-WING DESIGN WITH BRT. ALUMINUM FINISH.
Floor Jacs - Adjustable (6' - 3" to 12') THESE JACKS ARE RENTED IN PAIRS. PRICE QUOTED IS FOR THE PAIR. ADJUSTS FROM 6'-3" TO 12' HEIGHTS. EACH UNIT WILL SUPPORT 5000 LBS. FULLY OPEN TO 8000 LBS FULLY CLOSED OF LOAD.
Generator 2300 WATTKW WITH UP TO 20 CONTINUOUS AMPS - AND - 9000 WATT kW RATING WITH UP TO 70 CONTINUOUS AMPS @ 120 VAC. HAS GROUND FAULT INTERRUPTER PROTECTION FOR TOOLS REQUIRING WATER USE. ACCESSORIES: EXTENSION CORD.
No Hub Cutter USED TO CUT NO HUB PIPE 2" TO 6". note: cost to release a jammed tool is $25.00
Floor Tool Attachment - Kango FLOOR CLEANING TOOL WITH FLEXIBLE BLADE FOR TILE REMOVAL.
Hammer - 15 lb. Chipping LIGHT SCALING, LIGHT CHISELING AND CLEANING OUT OF CONCRETE, BRICK, BLOCK. ACCESSORIES: BULL PT, FLAT, SCALING AND BUSHING CHISELS.
Hammer - 30 lb. Demolition 2" THICK CONCRETE SLAB AND WALL KNOCKOUT OF CONCRETE, BRICK & BLOCK. ACCESSORIES: BULL PT, FLAT, SCALING AND BUSHING CHISELS.
Hammer - 75 lb. Paving Breaker 4" THICK CONCRETE SLAB ACCESSORIES: BULL PT, FLAT, SCALING, ASPHALT, CLAY SPADE, SPIKE, TAMPER PLATE.
Hammer - 11245 Rotary CONCRETE DRILLING CAPACITIES OF UP TO 2" USING A SPIRAL PERCUSSION CARBIDE BIT, AND 4" WITH A CORE BIT TO LENGTH UP TO 36" LONG. ACCESSORIES: PERCUSSION CARBIDE BITS (½" UP TO 2") CORE BITS (2" UP TO 4" BY ½ " INCREMENTS).
Tamper Plate FOR COMPACTING LOOSE SOIL FROM GROUND FILL.
Rotary Bits - Below 2" SOLID PERCUSSION CARBIDE BITS START AT3/8" UP TO 2" BY LENGTHS OF UP TO 36"LONG.
Hammer - 11241 Rotary CONCRETE DRILLING CAPACITIES OF UP TO 1" USING A SPIRAL PERCUSSION BIT, AND 2" WITH A CORE BIT.
Mini Grinder WHEN USED AS A GRINDER OR CUTTING (CONCRETE OR MARBLE) GUARD MUST BE USED FOR OSHA COMPLIANCE. ACCESSORIES: BLADE FOR STEEL AND FOR MASONRY MATERIAL. CAN BE RENTED WITH A DIAMOND BLADE TO CUT BRICK, BLOCK, CONCRETE OR STONES.
Masonry Saw (block/brick) FOR WET CUTTING OF BRICK/BLOCK USE A 12 OR 10 GAUGE EXTENSION CORD WITH 14" DIAMOND BLADE. THE BLADE IS CHARGED AT A $7.00 FOR EVERY .001 WEAR ON BLADE MEASURED BY USE OF A BLADE GAUGE. ACCESSORIES: DIAMOND BLADES, GOGGLES, GFI.
DrainCleaner - 75' x 1/2" UNCLOGS LARGE DIAMETER DRAINS, OPERATES EASIER THAN MANUAL UNIT AND SAVES OUTSIDE LABOR COSTS.ACCESSORIES: ARROW HEAD, 2", 3" OR 4" CUTTERS, RETRIEVER, CONNECTORS, GFI.
Kinetic Water Ram UNCLOGS DRAINS BY USING WATER PRESSURE WITHOUT UNDUE STRESS ON PIPE WALLS.
Trapp Snake - 25' x 1/4" USE WITH DRILL TO UNCLOG SMALL DIAMETER DRAIN SUCH AS A SINK.
Pallet Jack USED TO LIFT FROM 3" TO 18". HEIGHTS - 2 TONS WORTH OF MATERIAL
Pressure Washer COLD-WATER PRESSURE WASHER, GAS POWERED (215 LBS.) ON WHEELS- FOR RECREATIONAL AND INDUSTRIAL CLEANING, FROM BOATS TO BUILDINGS-3500PSI WITH A 4.7 GAL/MIN DISCHARGE-(RUNNING ON A VANGUARD 16 H.P. ENGINE)-SIZE OF UNIT 42"X27"X29". ACCESSORIES: NOZZLES AVAILABLE 0, 15, 25, 40 DEGREES, CHEMICAL INJECTOR, 30" OR 72" EXTENSION RODS, DYNA-MIGHT, AND MASONRY RESTORER.
6' Extention Wand THIS EXTENSION WAND CAN REACH UP TO A 20' HEIGHT. ACCESSORIES: NOTE: MASONRY RESTORER IS APPLIED WITH A LONG HANDLE BRUSH.
Downstream Chemical Injector THE PRESSURE WASHER CAN SIPHON AND MIX DETERGENTS WITH THE USE OF LANDA'S OPTIONAL CHEMICAL INJECTOR KIT.(USE ONLY OPEN NOZZLE) 40, 25, 15, 0 DEGREE NOZZLES AVAILABLE. ACCESSORIES: CHEMICAL SOLUTIONS-DYNA-MIGHT OR MASONRY RESTORER.
Disc Grinder/Sander (7" or 9") CAN BE USED AS A SANDER OR GRINDER WITH PROPER WHEELGUARD FOR GRINDING OPERATIONS. ACCESSORIES: ABRASIVE AND SANDING DISCS FOR METAL, MASONRY AND WOOD ACCESSORIES: ABRASIVE AND SANDING DISCS FOR METAL, MASONRY AND WOOD
Sander - Oscilating (Finishing) ACCESSORIES: 9"X11" SHEET PRODUCTION PAPER, AND SCREENS GRITS 40, 60, 80, 100, 120, 150, 180, 220, 320X.
Stud Gun TEST REQUIRED!!! LOW VELOCITY POWDER-ACTUATED TOOL UTILIZES ENERGY FROM SPECIAL BLANK LOADS TO DRIVE A CAPTIVE PISTON THAT IN TURN SETS A FASTENER OR THREADED STUD INTO STEEL OR CONCRETE WITH A SINGLE BLOW. ACCESSORIES: SHOTS, THREADED PINS, EYEBOLTS, PINS W/W/O WASHERS.
Sump Pump - Electric USED TO PUMP WATER FROM A BASEMENT, WELL, ELEVATOR SHAFT, ROOFTOP AT A RATE OF 3 250 GPH @ 5', 2500 GPH @ 10' OR 1550 GPH @ 15'- OTHER PUMPS WILL PUMP DOWN TO 3/16" HIGH. ACCESSORIES: GROUND FAULT INTERRUPTER (GFI)
Saw - 12" Concrete Saw CUTS REBAR, CONCRETE, BRICK, BLOCK OR STEEL TO A DEPTH OF 4". ACCESSORIES: GOGGLES, ABRASIVE BLADES. METAL/CONCRETE, DIA. BLDS, GLOVES, (GFI).
Saw - Band CUTS 4¾"X 4¾" RANGE OF MATERIALS WITH FAST, LONG-LASTING, SUPER TOUGH BIMETAL BLADES. CAN USE WAX TO PROLONG BLADE LIFE. ACCESSORIES: GOGGLES, BI-METAL, CARBON STEEL AND HIGH SPEED STEEL BLADES.
Saw - Table SAWS FAST AND ACCURATE WITH PRECISION WHILE PRODUCING BEVELING, PLOUGHING, DADOCUTS, MITERS SAFELY. ACCESSORIES: GOGGLES, 10" PRECISION CUT OFF, MITRE BOX, SMOOTH CUT, ALUMINUM AND PLASTIC, TABLE SAW BLADES.
Saw - 10" Mitre CUTS/MITRES WOOD TO REQUIRED ANGLE FAST AND CLEAN FOR GREATER ACCURACY IN TRIM AND WOODWORK AT 45 DEGREES MAX. WIDTH 2¼"X37/8"; MAX. HEIGHT 39/16"x3". ACCESSORIES: GOGGLES, PRECISION CUT MITRE BLADE.
Saw - Jig (Sabre) CUTS PLASTIC, WOOD, ALUMINUM OR LIGHT METAL AND PRODUCES CURVATURES OR FIT IN TIGHT PLACES. ACCESSORIES: JIGSAW BLADES FOR WOOD, METAL, MASONRY AND PLASTICS.
Saw - 14" Chop FOR USE WITH ABRASIVE CUT-OFF WHEELS, FAST CUTTING ACTION IN ANGLE IRON, PIPE, TUBING CONDUIT AND CHANNELS. ACCESSORIES: GOGGLES, ABRASIVE BLADES FOR METAL/MASONRY.
Saw - 7¼, 8¼" Worm Drive WORM DRIVE GEARS DESIGNED FOR CUTTING HEAVY DUTY LUMBER AND CONCRETE WITH DEPTH OF CUT UP TO 1 1/2 ACCESSORIES: GOGGLES, 7" OR 8" DIAMOND BLADE FOR MARBLE, GRANITE AND/OR CONCRETE BRICK OR BLOCK.
14" Diamond Blade EXPLANATION: CHARGED OUT AS A $50 BASE PRICE PLUS $7 FOR EVERY .001 WEAR ON BLADE. CALCULATION OF CHARGES MEASURED BY DIGI-MATIC BLADE GAUGE BEFORE AND AFTER USE. ACCESSORIES: GOGGLES.
Saw - 10" Compound Slide MITRE CUT, BEVEL CUTS AND COMPOUND MITRE CUTS WITH BEVEL ANGLE AT 45 DEGREES LEFT WITH MITRE ANGLE 19/16INCH x 12 INCH AT 0 DEGREES AND 19/16x815/32AT 45 DGEREES. ACCESSORIES: GOGGLES, 10 INCH PRECISION CUT MITRE SAW BLADE.
Saw - Concrete (Walk Behind) ACCURATE FAST-CUTTING UP TO 4 INCHES DEEP WITH DIAMOND/ABRASIVE BLADES TO CUT CONCRETE/ASPHALT WITH REBAR. ADDITIONAL: $50 BASE PRICE FOR BLADE & $7 FOR EVERY .001 WEAR. ACCESSORIES: GOGGLES, 1 1/2 INCH OPENED BOX WRENCH, DIAMOND BLADE 14 INCH.  
Saw - Mitre 15" CUTS/MITERS WOOD TO REQUIRED ANGLES
4¾" x 6" @ 90 DEGREES
4¾" x 4½" @ 45 DEGREES
ACCESSORIES: GOGGLES, 14" MITRE BOX SAW BLADE. 		 
Sawzall RECIPROCATING SAW TO ROUGH-IN WITH IN LINE RECIPROCATING ACTION TO FINISH CUT WOOD SURFACES, AUTOBODY METAL SHEETROCK, PLASTER, CAST IRON OR MASONRY. ACCESSORIES: GOGGLES, BLADES FOR METAL, WOOD, PLASTIC, MASONRY, AND CAST IRON.
Saw - 12" Compound Slide MITRE CUTS, BEVEL CUTS AND COMPOUND MITRE CUTS WITH BEVEL ANGLE AT 45 DEGREES LEFT WITH MITRE ANGLE 3 11/16" x 85/8" AT 45 DEGREES. ACCESSORIES: GOGGLES, 12" PRECISION CUT MITRE SAW BLADE.  
Saw - Circular 7¾" FOR GENERAL CARPENTRY NEEDS.
Paint Sprayer - HVLP USED TO SPRAY LATEX OR OIL PAINTS. THIS UNIT MINIMIZES OVERSPRAY BY MEANS OF LOW AIR PRESURE (20-10 PSI) AND HIGH AIR VOLUME (10-25 CFM). THE RESULT IS: LESS TIME MASKING PREP WORK:LESS MATERIAL WASTE; LESS TIME CLEANING UP… MORE PROFIT  

† - Actual look of tools is different. The pictures are given for illustration only.
Products
SITES TO VIEW:

Roof Swing Hoists
Rubbish Chutes
Sandblaster
Scaffolding

Generators
Welders
Pumps
Saws
Cement Mixers
Rebar Bender/Cutters
Reproofing (MK-6)
Lifts (All)

Post Drivers
Cable Pullers/Benders
Concrete Hydrolic Chain Saw
Concrete Grinders

Dehumidifiers
Turbo Dryers
Post-Hole Diggers
Snake Camera

Acoustic Paint Sprayer
Backhoe/Loaders

Chain Hoist
Compressors

Concrete Breaker
Concrete Buggy
Concrete Finish Trower
Excavator - MidSize - Track
Front End Loader -Skid Steer
Hydro-Static Tester -(500 Lbs)
Ladder Hoist (Electrictors)
Light Tower 4/1000 Watt 6kw
Log Splitter
Mig-Or Spot Welder
Pipe Binder - Hydraulic
Pipe Freezer
Pipe Thawer
Pipe Turner (Ridgid 300)
Pressure Washer - Hot Washer
Rock Splitter
Roof Cutter - Walk Behind

   

lnk